Consult us for a full range of example solutions to positioning problems

Q&A Improvement Case Studies

Improved accuracy

  • Looking for a solution for detecting 10μm of Power steering parts… 2013.10.11

  • Air sensor is low accuracy that confirming adhesion of Precision Component for PC cannot be done properly…2013.09.04

  • Radiation degrades photomicrosensors fast and we have to replace them every two or three months.2012.09.10

  • False detection of photoelectric sensors results in damage to HDD disks. We are experiencing problems because of the production of defective disks.2012.09.10

  • Radiation degrades optical fiber sensors. Are there any sensors durable under radiation exposure?2012.09.10

  • The switch is not broken but false signals frequently occurs. It is necessary to detect the opening and closing of disk brake pads without fail!2012.09.10

  • The signal point of proximity sensors varies with changes of the external environment.2012.09.10

  • Can the double feeding of paper as thin as 0.1 mm really be prevented by microswitches?2012.09.10

  • We have some problems with the presence detection of wafers for semiconductor devices with photoelectric sensors.2012.09.10

  • We need to correct the deviation of printing plates in micron increments.2012.09.10

  • We are experiencing difficulties because proximity sensors cannot achieve high precision for bobbin positioning in automatic knitting machines. 2012.09.10

  • Can 1 mm or smaller slight movements of diaphragms be detected stably with switches?2012.09.10

  • Optical fiber sensors detect objects falsely on conveyors.2012.09.10

  • Is the zero seek of carriers possible inside vacuum film forming equipment for FPDs?2012.09.10

  • Mutual interference of neighboring proximity sensors prevents stable detection.2012.09.10

  • False detection occurs because of condensation on the lens. We have difficulties because image sensors are easily affected by welding fumes.2012.09.10

  • Are optical fiber sensors the best for glass substrate alignment inside vacuum film forming equipment for FPDs?2012.09.10

  • Ultrasonic sensors cannot reliably detect 0.1 mm-thick sheets if the material type varies.2012.09.10

  • The Z-axis of a desktop robot needs correction.2012.09.10

  • Water drops on the liquid crystal glass cause false detection by optical fiber sensors.2012.09.10

  • I have some problems with the precision of air sensors for seating confirmation.2012.09.10

  • Can the slight movements of valve gates be detected at high temperatures during mold injection?2012.09.10